The influence of processing equipment on the mold processing

The influence of processing equipment on the mold processing

  Dalian mold processing, if it is the rotation of the body, I can use the lathe on it, the higher precision can increase the grinder. For non rotary body processing, usually the use of milling machine to carry out. For mold processing, if it is the rotation of the body, I can use the lathe can be a higher precision can increase the grinder. For non rotary body processing, usually the use of milling machine to carry out. Die processing a large range of knowledge elements it contains is very much, so the learners, the work is very difficult, and takes some time to do, otherwise it is not good to conduct a comprehensive study and understanding. Die processing, the type of processing there are many, such as electrochemical machining, EDM, wire cutting and NC machining and so on, these are very common, but also are processed very basic, for now.

  The stamping process can be divided into the forming process and the separation process of these two categories, the former includes bending, stretching and curling, including cutting, blanking and punching etc.. Stamping process commonly used equipment is the press, it has two kinds of mechanical press and hydraulic press; and the material, it is based on sheet metal and material based, non-metallic materials are rubber board, rubber and plastic plate, etc.. The history of China's mold development, only about 30 years, so in terms of design, technology, technology and experience, compared with the level of production abroad, there is still a big gap. High processing accuracy requirements: a mold, usually composed of several modules, at least three. And between the modules is put together, is required to have high precision, tend to reach um level.