How to prolong the service life of stamping die?

The purpose of die maintenance is to quickly find out the problems and solve them so that the mold can be restored to its original condition and can continue to produce qualified standard products. The same mold and manufacture of products with the same size and shape, namely each project processing after the completion of a part or all of the size and shape, so when the products are variable, you can according to variation of parts and find the processing procedure, and make restitution to repair, if the judgment results for design errors, i.e. design changes.

Dalian stamping die is the main stamping process equipment, stamping parts is up and down the relative movement of the mold to complete. Because of the continuous separation of the upper and lower molds, if the worker's fingers continue to enter or stay in the closed area of the mold, it will pose a serious threat to his personal safety.

The upper and lower formwork is the basic part of the die, and all the other parts are mounted and fixed on it. The plane size of the template, especially the front and back direction, should be adapted to the parts, too large or too small to be beneficial to the operation. The same product stamping die manufactured with the same size and shape, namely each project processing after the completion of a part or all of the size and shape, so when the products are based on variation, variation and find the parts processing station project, and make restitution to repair, if the determination result is wrong, that is to change the design.

Mold maintenance is based on this principle. The ultimate goal of all stamping is: high productivity, high quality, low cost. The design and construction of the lathe bed, top structure and fuselage frame will play a decisive role in this goal. And if we want to improve the life of the die, improve product quality, consider the movement of the slider, the impact of equipment is very important. The basic structure, the sturdy frame structure of the bed and the isolation belt of the foundation can decompose the impact force in the stamping process.