Elements to be considered in the design of Dalian stamping parts

The inspection of equipment is very critical. When a stamping factory can have a better understanding of its necessities, it will better guarantee the successful completion of the whole production process. Stamping parts processing factory can seriously do the actual inspection work, equipment has been in a good state, so for the future better production is also a kind of invisible security, comprehensive consideration to the practical problems in this area, and really make sure we can complete the entire inspection work, this is the best.



When designing stamping parts, we must follow the principles of simple appearance, reasonable structure and simple operation. Besides, assembly is also convenient and easy to maintain. In addition, we need to achieve the use and technical functions of products, so as to meet the requirements of stamping parts in actual production. That is to say, the production of Dalian stamping parts can not be separated from two aspects, one is the press, and the other is the mold. For stamping dies, they must be sharpened after long time use, and the surface must be demagnetization after grinding. Otherwise, the phenomenon of blocking will happen, and the daily care and lubrication of stamping dies should also be done.



When facing the bad condition of stamping parts, the conventional way of treatment is to determine the amount of deformation compensation according to the material and product structure. Then, according to the amount of compensation, we design the stamping die to produce finished products or semi-finished products, and further process semi-finished products to finished products. The common bad phenomena on the stamping parts include crack, wrinkling, pulling, uneven thickness, non forming and other tapping and thread processing.



To improve the structure of stamping parts, it is required that the radius of each fillet should be as large as possible, the depth of the shape of the surface in the drawing direction should be shallow, the depth is uniform, the shape is as simple as possible, and the change will be as smooth as possible, so as to reduce the possibility of cracking.