introduce a few kinds of stamping die stamping die processing plant terms

introduce a few kinds of stamping die stamping die processing plant terms

withMould processingProduct has greatly increased the production efficiency, but also save raw materials, reduce energy consumption and cost, high product consistency.So mold is known as the "benefit amplifier", in foreign countries, mold is known as the "golden key", "into the motive force of the affluent society", and so on.Look from another Angle, the mould is humanization, age, personalized and creative products.More important is the mold development, the use of mould industry, the international competitiveness of their products also increased.According to statistics, the mould will lead to the proportion of its relevant industries is about 1:100, namely 100 million yuan mold development, can drive the related industrial 10 billion yuan.

1, the drawing

Drawing is the flat wool or process into surface shape of a stamping process, rely mainly on the surface the extension of punch material at the bottom of the form.

2, bent

Stretch bending is in tension and bending moment under the action of bending deformation, make the whole bending transverse tensile stress by a stamping process.

3, bulging

Bulging is hollow or tubular parts along the radial outward expansion of a stamping process.Cutting cutting by one forming process is divided into several kind of stamping process.

4, leveling

Leveling is to improve the partial or whole straightness of a planar parts stamping process.Rolling forming

5,

Edge is to process a rolled edge closer to the closed circle of a stamping process.The axis of the edge round shape is linear.

6, roll edge

Volume is a hollow pieces of top edge roll into nearly closed round a stamping process.

7, rolling forming is relying on an extension of the material to make the process forming local concave or convex stamping process.Rolling forming the change of thickness of material for the purpose, that is, a small amount of thickness change is naturally formed in the process of deformation, not specified design requirements.

8, the depth of counter loop

Counter loop is the hollow process inside deep eversion of a deep drawing process.

9, differential temperature drawing

Differential temperature drawing is the use of heating, cooling, make for deformation of material is much higher than the temperature of deformation part is part of the temperature of the material, thus improve the degree of deformation of a deep drawing process.

10, bending

Bending is to use pressure to make material produce plastic deformation, which are curved into a certain curvature, the shape of the Angle of a stamping process.

11, chisel cut

Chisel cutting is to use sharp chisel cut die for blanking and punching process.Is no lower die chiselling, material below is flat on the mat, is the vast majority of non-metallic materials.

12, the double hole

Turn hole is around the hole the material into its side flange of a stamping process.

13, flanging

Flanging is around the contour curve will translate materials to the shorter edges of a side a stamping process.

14, deep drawing,

Deep drawing is the flat wool or process into the hollow

You are welcome to call dalian stamping tool plant.