An article to understand die processing

Die processing refers to the processing of molding and blank making tools, in addition to the shear die and die cutting die. Normally, the die has two parts: the upper die and the lower die. The steel plate is placed between the upper and lower molds, and the material is molded under the action of the press. When the press is opened, the workpiece determined by the mold shape or the corresponding scrap can be obtained.



Small electronic connector, to the dashboard of a workpiece can die molding. A progressive die is a set of moulds that can automatically move the workpiece from one position to another, and get the parts at the last station. Die processing refers to the processing of molding and blank making tools, in addition to the shear die and die cutting die.



In general, the mold processing in Dalian consists of two parts: the upper die and the lower die. The steel plate is placed between the upper and lower molds, and the material is molded under the action of the press. When the press is opened, the workpiece determined by the mold shape or the corresponding scrap can be obtained.



At present, mould is one of the most widely used industries in CNC machining. With the increasing demand for the quality of mould products in the market, more and more enterprises will choose the processing center. The performance of the machining center will directly affect the processing technology, processing quality and production efficiency of the mold. The machining center has comprehensively applied mechanical technology, electronic technology, computer technology, electrical technology, hydraulic technology and optical technology. It has the advantages of sophistication, complexity, rapid development, variety and grade, and the price is relatively high.



Because the mold material is hard, and the precision of the processing center technical parameter description is the technical parameter of the machining center under no load. The accuracy of the actual processing state is also related to the rigidity of the machining center, so it should pay special attention to the rigidity of the machining center in the mold industry.